Beta Image

Latest beta image:

Although this image is still in beta stage, all installed programs are fully supported with upgrades and security patches for several years.

  • Supports Pi 4, Pi 3 and Pi 2 (Pi 1 and Pi zero no longer supported)
  • Based on latest Raspbian Buster
  • Contains FreePBX and Asterisk 16.5.0
SHA-1 a1e19a5c988e19ce85104d22b57621d1e95c1f06

An 8GB card or larger is recommended.

Note: In case the “Apply Config” button takes very long or never completes, set “Enable Module Signature Checking” to no in advanced settings.

Once your RasPBX has successfully booted, run this command on the console to install the latest additions and improvements:


SSH login:
user: root
password: raspberry

4 thoughts on “Beta Image

  1. It seems simple and yet ….

    first edit properly /etc/network/interfaces

    then turn off the DHCP client

  2. nano /etc/dhcpcd.conf

    Add this to the end of the file (edit your IP and router gateway address):

    interface eth0
    static ip_address=
    static routers=
    static domain_name_servers=